Bee Ready
Fishing Rod Holders
HOME ONE ROD HOLDER TWO ROD HOLDER THREE ROD HOLDER FOUR ROD HOLDER
MOUNTING KITS CONVERSION KITS RISER/PEDESTAL MOUNTS TRANSPORT HOLDERS
LUND & LOWES MOUNTS BEE READY RODS DOCK and BANK FISHING PRO STAFF
FISH Caught w/BEE READYS BOATS with BEE READYS SPIDER RIGGING LINKS MAP TO STORE
We accept all major credit cards 
or PayPal 
__________________________________________________________________________________________________________________
RISER AND BASE MOUNT
KB. Removable 18 inch tall Riser with the almost indestructible ABS Nylon Base Mount ..$22.00
This new base is almost indestructible. Riser slides in and out of
mount so that rod holder and riser can be easily removed and
stored away. Base comes with a set screw that holds the riser in.
Get multiple bases and move the holders around your boat or from boat to boat.
The Riser is 18 inches tall. Taller ones can be ordered special for $5 extra, see below.
KBE. Removable Riser "Extended Length" with the ABS Nylon Base Mount ..$27.00
Same as above but 25 1/2 inches tall.
_______________________________________________________________________________________________________________________
FLOAT
M. Float Noodle for Riser................... .. . $ 2.00
Noodle slides over riser rod to be used for
jigs, hooks or leaders & it floats if dropped in water.
Doug
Tex Elliott, (817-988-5468)
Lake
Lavon Catfish Guide says
.
I have been using the noodles on my rod holders for a while....because they are a great
place to put some already made up leaders.....put a rubber band on the bottom and it
will keep the line in order...works like a charm.
_________________________________________________________________________________________________________________________
RISER MOUNT
N. Riser Rod only .............................. .. . $ 12.00
Riser only without the base. 18 inches tall.
NE. Riser Rod only (25 1/2 inches tall)........ . . $ 17.00
Riser only without the base. 25 1/2 inches tall.
________________________________________________________________________________________________________________________
BASE MOUNT
PB. Almost indestructible ABS Nylon Base Mount w/Stainless Steel Hardware...... $10.00
Can be mounted on your boat in two different ways. Bolted on (if you can get
underneath your deck) or with Lag Screws. Lag screws included. Install
multiple bases on your boat to have multiple locations for your risers.
________________________________________________________________________________________________________________________
SIDE MOUNT
SMN. Almost indestructible ABS Nylon Side Mount w/Stainless Steel Hardware...... $10.00
Side mount mounted to the inside of your gunwale wall. Opening to slide the riser
up and down through. Has lag screws included.
Install multiple mounts on your boat to have multiple locations for your risers.
________________________________________________________________________________________________________________________
PEDESTAL MOUNT
Q2.0. Pedestal Mount ................2 to 2 1/2 inch "C" Clamp for pole.... $50.00
Can be mounted on your boat without drilling any holes. Clamp onto any
existing seat pedestal. "C" clamp fits any 2 inch to 2 1/2 inch pedestal.
Heavy duty non-rusting aluminum holds the base
in place for a riser and any two rod, three rod or four rod holder.
You will need to buy the black base (PB) separately above.
It is 23 inches long from seat pedestal to riser.
(Rod Holder, Riser and Base shown are sold separately).
For more pictures.....(click here)
or you may contact us direct 214-354-9570 or
email us with any questions ed@ProAnglerTackle.com
We accept all major credit cards or PayPal
or we can take orders over the phone.